Home > Knifemaking Tools > Vises
Keep your work steady with a vise! vises can attach to your table and hold your project down so that you can get a better angle on your work
Sort By:
1
PV343 Nylon Jaws

All Parts for PanaVise products are interchangeable the heads, bases, etc., can be used to mix & match for several different styles. Made in the USA.

Price: $2.49
PV352 Teflon Hi-Heat Jaws

All Parts for PanaVise products are interchangeable the heads, bases, etc., can be used to mix & match for several different styles. Made in the USA.

Price: $11.49
PV354 Non-Mar Brass Jaws

All Parts for PanaVise products are interchangeable the heads, bases, etc., can be used to mix & match for several different styles. Made in the USA.

Price: $11.49
CL400 Kant Twist Clamp

These clamps are a must when gluing handles or soldering guards or bolsters to your blade.

Price: $11.95
CL401 Kant Twist Clamp

These clamps are a must when gluing handles or soldering guards or bolsters to your blade.

Price: $12.95
GN93 Adjustable Pin Vise

Holds small drills, burrs, wires, files, reamers and other small tools, 0 to 1/4".

Price: $13.95
CL403 Kant Twist Clamp

These clamps are a must when gluing handles or soldering guards or bolsters to your blade.

Price: $13.95
GN90 Double End Pin Vise

Use to hold small pins, rods, wire, drills, taps, and other small tools.

Price: $14.95
JS316 Optional Tilting Jaws (pr)

Optional tilting jaws with cushioned pads shown above on the vise allow you to better grip tapered parts such as blades and guns. The protective rubber pads will help prevent slippage and marring of parts.

Price: $15.95
CL405 Kant Twist Clamp

These clamps are a must when gluing handles or soldering guards or bolsters to your blade.

Price: $16.95
JS355 Adjustable Clamping Vise

Mounts to any bench top up to 2" thick. Vise rotates 360, 0 to 45 swivel action in any position, 0 to 90 swivel position. Dense rubber jaw pads and bench pad. Vise capacity is 2". Jaws measure 3 1/8" wide.

Price: $19.95
ST240A Starrett Pin Vise

Smooth section on handle allows vise to be held in machine chucks or collets. Handle has hole through entire length to accommodate stock up to the full size capacity so that long rods can be gripped close to the end. End of handle is knurled and has a smaller diameter than chuck which allows fast opening and closing and rapid rotation between the thumb and finger when filing or forming small work. All three vises have heavy nickel plated finish. All made in the USA.
Range, English      Range,Metric
0 to .055"              0 to 1.4mm

Price: $19.99
ST240C Starrett Pin Vise

Smooth section on handle allows vise to be held in machine chucks or collets. Handle has hole through entire length to accommodate stock up to the full size capacity so that long rods can be gripped close to the end. End of handle is knurled and has a smaller diameter
than chuck which allows fast opening and closing and rapid rotation between the thumb and finger when filing or forming small work. All three vises have heavy nickel plated finish. All made in the USA.

Range,English          Range, Metric
.045 to .135              1.2 to 3.4 mm

Price: $25.99
PV201 Panavise Junior

All Parts for PanaVise products are interchangeable the heads, bases, etc., can be used to mix & match for several different styles. Made in the USA.

Panavise Jr. uses the famous Panavise design that tilts, turns, twists and rotates. One quick turn of the control knob and you securely position your work exactly where you want it. Overall height is 6 3/4", weighs 1 lb. 4 oz., head rotates and swivels 360 degrees, pivots 210 degrees. Jaws are 1" wide and 2" high, opens 2 7/8" and are made of fiber reinforced thermal plastic alloy. Will stand continuous heat up to 350 degrees F (intermittently up to 400 degrees F.)

Price: $26.99
GN815 Steel Hand Vise

Great for holding small objects when polishing.

Price: $31.95
PV311 Panavise Bench Mount Clamp

Clamp your standard base panavise to any table or bench up to 3 7/16" thick. Four neoprene pads are included to add antimar, anti-slip to base without excessive tightening of the clamping screw. Includes screws for mounting the PanaVise base to clamp.

Price: $44.99
PV301 Standard Panavise

All Parts for PanaVise products are interchangeable the heads, bases, etc., can be used to mix & match for several different styles. Made in the USA.

The Standard PanaVise gives you a complete range of adjustments to suit your needs. With rotation through 360° and 180° tilt, PanaVise provides the perfect angle on any job. This vise opens to 2 1/4" with 15/16" throat. 2 1/2" nylon jaws can withstand continuous heat to 200°F. Head removes easily from base for additional use when grinding, polishing or drilling those hard to grip pieces.

List Price: $49.49
Price: $49.99
JS315 Versitile Knifemakers Vise

Here it is at last, the vise you have asked for. We now have a reproduction of the original Versa Vice. This unique vise swivels a full 360 degrees and then locks in place when the jaw is tightened. Mount sideways for versatility. Jaws measure 3 1/2" wide x 2 1/8" high and open to 9" capacity. This is the perfect knifemakers vise. Optional cushioned lined tilting jaws pivot to easily hold tapered material. Holes in jaws allow easy mounting of cushion faces. Standing 9" tall, 11" long and 3 1/2" wide, the base has a three hole pattern to bolt to work bench or pedestal. The Base foot print is approximately 5" x 6".

The Versatile Knifemakers Vise can also be mounted on side as shown above, then flipped over 180° to work from the other side. Can be mounted on corner of workbench to enable you to rotate a larger arc for long blades that go all the way below the top of the workbench.

Price: $52.95
PV376 Panavise Multi-Purpose Holder Wide Head Only

All Parts for PanaVise products are interchangeable the heads, bases, etc., can be used to mix & match for several different styles. Made in the USA.

The double action jaws on the Self-Centering Extra Wide Opening Head allow fast opening and closing. The self centering feature permits holding heavier objects because weight is centered over the base. Featuring extra wide capacity, the jaws open to a full 9 inches (229mm). The jaw plates can be reversed to close together. Ribbed on one side and “V” grooved on the other, the reversible jaw pads firmly hold cylindrical or odd shaped items. Tray Base Mount is exceptionally stable and resists tipping. It has six non-marring, anti skid neoprene base pads.

Price: $53.99
PV381 Vacuum Base Panavise

All Parts for PanaVise products are interchangeable the heads, bases, etc., can be used to mix & match for several different styles. Made in the USA.

The Vacuum PanaVise has all the features of the Standard PanaVise with the added portability of a vacuum base. The powerful suction pad allows rapid setup on any smooth, non-porous surface. Very useful on machinery.

Price: $67.49
PV622 Knifemaker's Contour Vise

Designed and built by an engraver and knifemaker. In just seconds you can hold knives securely for engraving and other detail work with this wonderful vise. Special chain-like linear jaws conform to unusual and compound shapes with ease. Lined with a special hard rubber ribbon, these jaws grip securely without high clamping force. The Knifemaker�s Contour Vise is totally adjustable for a wide range of widths and depths of knives. It mounts in any vise including all known engraving blocks. If you work on knives, get one�it�s a well-made bargain.

Price: $89.95
PV350 Panavise Multi-Purpose Holder Complete Work Center

All Parts for PanaVise products are interchangeable the heads, bases, etc., can be used to mix & match for several different styles. Made in the USA.

The double action jaws on the Self-Centering Extra Wide Opening Head allow fast opening and closing. The self centering feature permits holding heavier objects because weight is centered over the base. Featuring extra wide capacity, the jaws open to a full 9 inches (229mm). The jaw plates can be reversed to close together. Ribbed on one side and “V” grooved on the other, the reversible jaw pads firmly hold cylindrical or odd shaped items. Tray Base Mount is exceptionally stable and resists tipping. It has six non-marring, anti skid neoprene base pads.

Price: $89.99
PV502 Panapress

All Parts for PanaVise products are interchangeable the heads, bases, etc., can be used to mix & match for several different styles. Made in the USA.

The Precision PanaPress weighs less than 6 lbs. and stands 7" high. Featuring four nylon gibs for precision directional control of the reversible, vertical ram, this hand arbor press exerts pressure up to 1/4 ton. Ideal for compressing and straightening pins in your knifemaking projects.

Price: $165.99
   
 
1