Home > Knifemaking Tools > Tools You Need > File Guide
These versatile tools can be used for
holding your knife blades to do complex file work. Filing slots for
guards,reaching angles needed when hand sanding your blades.
Sort By:
1
GN93 Adjustable Pin Vise

Holds small drills, burrs, wires, files, reamers and other small tools, 0 to 1/4".

Price: $13.95
GN90 Double End Pin Vise

Use to hold small pins, rods, wire, drills, taps, and other small tools.

Price: $14.95
ST240A Starrett Pin Vise

Smooth section on handle allows vise to be held in machine chucks or collets. Handle has hole through entire length to accommodate stock up to the full size capacity so that long rods can be gripped close to the end. End of handle is knurled and has a smaller diameter than chuck which allows fast opening and closing and rapid rotation between the thumb and finger when filing or forming small work. All three vises have heavy nickel plated finish. All made in the USA.
Range, English      Range,Metric
0 to .055"              0 to 1.4mm

Price: $19.99
ST240C Starrett Pin Vise

Smooth section on handle allows vise to be held in machine chucks or collets. Handle has hole through entire length to accommodate stock up to the full size capacity so that long rods can be gripped close to the end. End of handle is knurled and has a smaller diameter
than chuck which allows fast opening and closing and rapid rotation between the thumb and finger when filing or forming small work. All three vises have heavy nickel plated finish. All made in the USA.

Range,English          Range, Metric
.045 to .135              1.2 to 3.4 mm

Price: $25.99
FG100 Hardened File Guide

This versatile tool can be used for holding your knife blades to do complex file work.

Price: $49.95
ST129 Starrett Bench Block

Block is made from a steel forging and is hardened and ground. Smooth finish on the face preserves finish of work being held. Base is recessed to make it light and yet strong. Approximately 1 1/2" high and 3" diameter. Holes vary in sizes from 1/8" to 5/8". Gunsmith Made in the USA.

Price: $89.00
   
 
1