Home > Knifemaking Tools > Drills > Carbide - Miscellaneous
Miscellaneous Carbide Drill bits
Sort By:
1
TD604 1/16" Carbide Drill Bit

Designed to drill through hard-to-drill materials such as hardened receivers and hardened knife blades. Fractional sizes are usually used for drilling pin, rivet and thong holes in blade tangs while the #28 and #31 are used for drilling receivers for scope mounts. For better results and longer drill life, run at speed specified for each size. Carbide drills are very brittle and must be used with great care. No warranty on this item. Made in the USA.


SIZE          DEC.       RPM
1/16"      .0625       2400

Price: $12.24
TD615 5/64" Carbide Drill Bit

Designed to drill through hard-to-drill materials such as hardened receivers and hardened knife blades. Fractional sizes are usually used for drilling pin, rivet and thong holes in blade tangs while the #28 and #31 are used for drilling receivers for scope mounts. For better results and longer drill life, run at speed specified for each size. Carbide drills are very brittle and must be used with great care. No warranty on this item. Made in the USA.

SIZE          DEC.           RPM
5/64"        .0781          1600

Price: $12.95
TD606 3/32" Carbide Drill Bit

Designed to drill through hard-to-drill materials such as hardened receivers and hardened knife blades. Fractional sizes are usually used for drilling pin, rivet and thong holes in blade tangs while the #28 and #31 are used for drilling receivers for scope mounts. For better results and longer drill life, run at speed specified for each size. Carbide drills are very brittle and must be used with great care. No warranty on this item. Made in the USA.

SIZE        DEC.       RPM
3/32"     .0937     2400

Price: $14.24
TD743 #43 Carbide Drill Bit

Designed to drill through hard-to-drill materials such as hardened receivers and hardened knife blades. Fractional sizes are usually used for drilling pin, rivet and thong holes in blade tangs while the #28 and #31 are used for drilling receivers for scope mounts. For better results and longer drill life, run at speed specified for each size. Carbide drills are very brittle and must be used with great care. No warranty on this item. Made in the USA.

SIZE      DEC.      RPM
43       .0890      1600

Price: $15.24
TD608 1/8" Carbide Drill Bit

Designed to drill through hard-to-drill materials such as hardened receivers and hardened knife blades. Fractional sizes are usually used for drilling pin, rivet and thong holes in blade tangs while the #28 and #31 are used for drilling receivers for scope mounts. For better results and longer drill life, run at speed specified for each size. Carbide drills are very brittle and must be used with great care. No warranty on this item. Made in the USA.

SIZE         DEC.       RPM
1/8"      .1250       1600

Price: $15.75
TD733 3mm Carbide Drill Bit

Designed to drill through hard-to-drill materials such as hardened receivers and hardened knife blades. Fractional sizes are usually used for drilling pin, rivet and thong holes in blade tangs while the #28 and #31 are used for drilling receivers for scope mounts. For better results and longer drill life, run at speed specified for each size. Carbide drills are very brittle and must be used with great care. No warranty on this item. Made in the USA.

SIZE        DEC.      RPM
3mm       .1181     1600

Price: $17.07
TD731 #31 Carbide Drill Bit

Designed to drill through hard-to-drill materials such as hardened receivers and hardened knife blades. Fractional sizes are usually used for drilling pin, rivet and thong holes in blade tangs while the #28 and #31 are used for drilling receivers for scope mounts. For better results and longer drill life, run at speed specified for each size. Carbide drills are very brittle and must be used with great care. No warranty on this item. Made in the USA.

SIZE    DEC.       RPM
31      .1200      1600

Price: $17.18
TD730 #30 Carbide Drill Bit

Designed to drill through hard-to-drill materials such as hardened receivers and hardened knife blades. Fractional sizes are usually used for drilling pin, rivet and thong holes in blade tangs while the #28 and #31 are used for drilling receivers for scope mounts. For better results and longer drill life, run at speed specified for each size. Carbide drills are very brittle and must be used with great care. No warranty on this item. Made in the USA.

SIZE      DEC.      RPM
30        .1285      1600

Price: $17.75
TD728 #28 Carbide Drill Bit

Designed to drill through hard-to-drill materials such as hardened receivers and hardened knife blades. Fractional sizes are usually used for drilling pin, rivet and thong holes in blade tangs while the #28 and #31 are used for drilling receivers for scope mounts. For better results and longer drill life, run at speed specified for each size. Carbide drills are very brittle and must be used with great care. No warranty on this item. Made in the USA.

SIZE       DEC.       RPM
28         .1405       1400

Price: $18.54
TD613 5/32" Carbide Drill Bit

Designed to drill through hard-to-drill materials such as hardened receivers and hardened knife blades. Fractional sizes are usually used for drilling pin, rivet and thong holes in blade tangs while the #28 and #31 are used for drilling receivers for scope mounts. For better results and longer drill life, run at speed specified for each size. Carbide drills are very brittle and must be used with great care. No warranty on this item. Made in the USA.

SIZE         DEC.        RPM
5/32"       .1562        1200

Price: $20.95
TD612 3/16" Carbide Drill Bit

Designed to drill through hard-to-drill materials such as hardened receivers and hardened knife blades. Fractional sizes are usually used for drilling pin, rivet and thong holes in blade tangs while the #28 and #31 are used for drilling receivers for scope mounts. For better results and longer drill life, run at speed specified for each size. Carbide drills are very brittle and must be used with great care. No warranty on this item. Made in the USA.

SIZE         DEC.       RPM
3/16"       .1875      1200

Price: $23.45
TD712 12 Carbide Drill Bit

Designed to drill through hard-to-drill materials such as hardened receivers and hardened knife blades. Fractional sizes are usually used for drilling pin, rivet and thong holes in blade tangs while the #28 and #31 are used for drilling receivers for scope mounts. For better results and longer drill life, run at speed specified for each size. Carbide drills are very brittle and must be used with great care. No warranty on this item. Made in the USA.

SIZE            DEC.       RPM
7/32"          .1890      1000

Price: $26.95
TD614 7/32" Carbide Drill Bit

Designed to drill through hard-to-drill materials such as hardened receivers and hardened knife blades. Fractional sizes are usually used for drilling pin, rivet and thong holes in blade tangs while the #28 and #31 are used for drilling receivers for scope mounts. For better results and longer drill life, run at speed specified for each size. Carbide drills are very brittle and must be used with great care. No warranty on this item. Made in the USA.

SIZE            DEC.       RPM
7/32"          .2187      1000

Price: $29.75
TD616 1/4" Carbide Drill Bit

Designed to drill through hard-to-drill materials such as hardened receivers and hardened knife blades. Fractional sizes are usually used for drilling pin, rivet and thong holes in blade tangs while the #28 and #31 are used for drilling receivers for scope mounts. For better results and longer drill life, run at speed specified for each size. Carbide drills are very brittle and must be used with great care. No warranty on this item. Made in the USA.

SIZE        DEC.       RPM
1/4"       .2500       800

Price: $33.54
TD617 3/8" Carbide Drill Bit

Designed to drill through hard-to-drill materials such as hardened receivers and hardened knife blades. Fractional sizes are usually used for drilling pin, rivet and thong holes in blade tangs while the #28 and #31 are used for drilling receivers for scope mounts. For better results and longer drill life, run at speed specified for each size. Carbide drills are very brittle and must be used with great care. No warranty on this item. Made in the USA.

SIZE        DEC.       RPM
1/4"       .3750       800

Price: $59.75
   
 
1