Home > Adhesives > West System Adhesives
West System Epoxy and Pigments
Sort By:
1
WE300 Mini Pump Set

Designed for convenient and accurate metering of #105 resin and #206 hardener. Calibrated to deliver approximately 0.8 fl oz of resin / hardener with one full stroke. Set contains one resin pump, and two hardener pumps which mount directly on the containers eliminating mess and waste. Read and follow priming, ratio verification, and operating instructions included with pumps. ***Resin and Hardener NOT included***

Price: $17.25
WE5018 White Pigment

Epoxy based liquid colorants used to tint epoxy mixture and proved an even base fro the final finish system. Add to mixed resin/hardener at rate of approx. 1 tsp of pigment to a 8 fluid oz epoxy. More pigment increases the opaqueness and mixture viscosity. One 4 fl oz bottle will tint approximatly 1-1/2 gallons of epoxy.

Price: $17.95
WE5028 Black Pigment

Epoxy based liquid colorants used to tint epoxy mixture and proved an even base fro the final finish system. Add to mixed resin/hardener at rate of approx. 1 tsp of pigment to a 8 fluid oz epoxy. More pigment increases the opaqueness and mixture viscosity. One 4 fl oz bottle will tint approximatly 1-1/2 gallons of epoxy.

Price: $17.95
WE5038 Gray Pigment

Epoxy based liquid colorants used to tint epoxy mixture and proved an even base fro the final finish system. Add to mixed resin/hardener at rate of approx. 1 tsp of pigment to a 8 fluid oz epoxy. More pigment increases the opaqueness and mixture viscosity. One 4 fl oz bottle will tint approximatly 1-1/2 gallons of epoxy.

Price: $17.95
WE206A West System Adhesive 105/206 .44 pt Slow Hardener

WEST SYSTEM epoxy cures to a high-strength plastic solid at room temperatures, by mixing 105 liquid epoxy resin and 206 hardener in a 5:1 ratio. Designed specifically to bond to a wide range of materials including fiberglass, many metals, wood fibers, reinforcing fabrics, foam and other composite materials. This highly moisture-resistant plastic is highly recommended when extended working and cure time are needed or to provide adiquate working time at higher temperatures. The 206 slow-cure hardener has a working time of 90 to 110 minutes at 70℉ with a minimum cure temperature of 60℉. Cure time for maximum strength is 1-4 days. West Epoxy is easy to sand and shape when cured and does not shrink after curing.



Can NOT Ship Air

Price: $20.50
WE6508 G/Flex® Epoxy G/Flex Liquid 4 oz.

G/flex epoxies are toughened, resielent  two-part epoxies engeniered for superior grip to metals, plastics, glass, masonry, fiberglass, and difficult to bond woods. G/flex epoxies make bonds that absorb the stress of expansion, conteaction, shock and vibration. Easy-to-use 1:1 mix ratio gives you about 46 minute pot life and a working time of 75 minutes at room temperature. Initial cure in 3-4 hours with workable cure in 7-10 hours.

Price: $22.49
WE105A West System Adhesive 105/206 Epoxy

WEST SYSTEM epoxy cures to a high-strength plastic solid at room temperatures, by mixing 105 liquid epoxy resin and 206 hardener in a 5:1 ratio. Designed specifically to bond to a wide range of materials including fiberglass, many metals, wood fibers, reinforcing fabrics, foam and other composite materials. This highly moisture-resistant plastic is highly recommended when extended working and cure time are needed or to provide adiquate working time at higher temperatures. The 206 slow-cure hardener has a working time of 90 to 110 minutes at 70℉ with a minimum cure temperature of 60℉. Cure time for maximum strength is 1-4 days. West Epoxy is easy to sand and shape when cured and does not shrink after curing.


Can NOT Ship Air

Price: $39.71
WE206B West System Adhesive 105/206 .86 qt Slow Hardener

WEST SYSTEM epoxy cures to a high-strength plastic solid at room temperatures, by mixing 105 liquid epoxy resin and 206 hardener in a 5:1 ratio. Designed specifically to bond to a wide range of materials including fiberglass, many metals, wood fibers, reinforcing fabrics, foam and other composite materials. This highly moisture-resistant plastic is highly recommended when extended working and cure time are needed or to provide adiquate working time at higher temperatures. The 206 slow-cure hardener has a working time of 90 to 110 minutes at 70℉ with a minimum cure temperature of 60℉. Cure time for maximum strength is 1-4 days. West Epoxy is easy to sand and shape when cured and does not shrink after curing.



Can NOT Ship Air

Price: $46.06
WE105B West System Adhesive 105/206 Epoxy .98 Gallon

WEST SYSTEM epoxy cures to a high-strength plastic solid at room temperatures, by mixing 105 liquid epoxy resin and 206 hardener in a 5:1 ratio. Designed specifically to bond to a wide range of materials including fiberglass, many metals, wood fibers, reinforcing fabrics, foam and other composite materials. This highly moisture-resistant plastic is highly recommended when extended working and cure time are needed or to provide adiquate working time at higher temperatures. The 206 slow-cure hardener has a working time of 90 to 110 minutes at 70℉ with a minimum cure temperature of 60℉. Cure time for maximum strength is 1-4 days. West Epoxy is easy to sand and shape when cured and does not shrink after curing.



Can NOT Ship Air

Price: $99.73
   
 
1