J319G Pattern 31 Green 1095 High Carbon Blade
Overall length 7-5/8", blade 3", width 1-1/8" and 5/32" thick
Available contoured & textured handles: M3131, G3111, G3131, G3151, G3161
Jantz Pattern Blades flat ground from 1095 High Carbon Steel and cryogenically heat treated to 57-58 Rc.
Made In USA
J319T Pattern 31 Tan 1095 High Carbon Blade
Overall length 7-5/8", blade 3", width 1-1/8" and 5/32" thick
Available contoured & textured handles: M3131, G3111, G3131, G3151, G3161
Jantz Pattern Blades flat ground from 1095 High Carbon Steel and cryogenically heat treated to 57-58 Rc.
Made In USA
J3196 Pattern 31 Stone Wash 1095 High Carbon Blade
Overall length 7-5/8", blade 3", width 1-1/8" and 5/32" thick
Available contoured & textured handles: M3131, G3111, G3131, G3151, G3161
Jantz Pattern Blades flat ground from 1095 High Carbon Steel and cryogenically heat treated to 57-58 Rc.
Made In USA
J3127 Pattern #31 D2 Tool Steel Peened Finish
Overall length 7-5/8" Blade length 3" Blade Width 1-1/8" Blade Thickness 5/32" Bolster Holes 1/8" Handle Holes 1/4" Thong Hole 1/4" HRC 59-61
Accessories sold separately. Available Bolsters: K311 3/16" Brass, K316 3/16" Stainless, K313 1/4"
Brass, K314 1/4" Stainless, K315 1/4" Nickel Silver. Available sheath:
KT310
Available contoured & textured handles: M3131, G3111, G3131, G3151, G3161
MADE IN USA by Jantz Supply in our newly equipped Davis, Oklahoma manufacturing facility using only the best cutlery grade steels available. Each blade is cryogenically processed during the heat treating process for optimal edge holding capabilities.
J3128 Pattern #31 D2 Tool Steel Satin Finish
Overall length 7-5/8" Blade length 3" Blade Width 1-1/8" Blade Thickness 5/32" Bolster Holes 1/8" Handle Holes 1/4" Thong Hole 1/4" HRC 59-61
Accessories sold separately.
Available contoured & textured handles: M3131, G3111, G3131, G3151, G3161
MADE IN USA by Jantz Supply in our newly equipped Davis, Oklahoma manufacturing facility using only the best cutlery grade steels available. Each blade is cryogenically processed during the heat treating process for optimal edge holding capabilities.
J3157 Pattern #31 CPM 154 Peened Finish
Overall length 7-5/8" Blade length: 3" Blade Width 1-1/8" Blade Thickness 5/32" Bolster Holes 1/8" Handle Holes 1/4" Thong Hole 1/4" HRC 59-60
Accessories sold separately.
Available Bolsters: K311 3/16" Brass, K316 3/16" Stainless, K313 1/4"
Brass, K314 1/4" Stainless, K315 1/4" Nickel Silver. Available sheath:
KT310
Available contoured & textured handles: M3131, G3111, G3131, G3151, G3161
MADE IN USA by Jantz Supply in our newly equipped Davis, Oklahoma manufacturing facility using only the best cutlery grade steels available. Each blade is cryogenically processed during the heat treating process for optimal edge holding capabilities.
|
|
