SecurityMetrics for PCI Compliance, QSA, IDS, Penetration Testing, Forensics, and Vulnerability Assessment
You are here: Home > Vises
Sort By:
1 2 3 4
#PV343 Nylon Jaws
Price: $2.50

All Parts for PanaVise products are interchangeable the heads, bases, etc., can be used to mix & match for several different styles. Made in the USA.
#PV352 Teflon Hi-Heat Jaws
Price: $9.95

All Parts for PanaVise products are interchangeable the heads, bases, etc., can be used to mix & match for several different styles. Made in the USA.
#PV354 Non-Mar Brass Jaws
Price: $9.95

All Parts for PanaVise products are interchangeable the heads, bases, etc., can be used to mix & match for several different styles. Made in the USA.
#CL400 Kant Twist Clamp
Price: $11.95

These clamps are a must when gluing handles or soldering guards or bolsters to your blade. The round handle on the Kant Twist clamps provide the ability to finely adjust the clamp pressure to your project and makes it easy to position your work. Clamps are small and light weight. The free-floating jaws adjust to unparallel surfaces, will not walk or twist when pressure is applied. Outside measurements and nominal clamping pressure of each clamp is as follows: CL400 is 1 3/8" x 1 1/2" 200 lbs.; CL401 is 1 3/4" x 2" 350 lbs.; CL403 is 3" x 3 3/16" 600 lbs.; CL405 is 3 1/4 x 3 1/2" 800 lbs. The clamp opening determines the thickest material you can clamp, the clamp depth is the maximum distance you can clamp from the edge.
CAT.#    OPENING    DEPTH
CL400    3/4"            3/8"
#CL401 Kant Twist Clamp
Price: $12.95

These clamps are a must when gluing handles or soldering guards or bolsters to your blade. The round handle on the Kant Twist clamps provide the ability to finely adjust the clamp pressure to your project and makes it easy to position your work. Clamps are small and light weight. The free-floating jaws adjust to unparallel surfaces, will not walk or twist when pressure is applied. Outside measurements and nominal clamping pressure of each clamp is as follows: CL400 is 1 3/8" x 1 1/2" 200 lbs.; CL401 is 1 3/4" x 2" 350 lbs.; CL403 is 3" x 3 3/16" 600 lbs.; CL405 is 3 1/4 x 3 1/2" 800 lbs. The clamp opening determines the thickest material you can clamp, the clamp depth is the maximum distance you can clamp from the edge.
CAT.#    OPENING    DEPTH
CL401        1"           1/2"
   
 
1 2 3 4