World's Largest supplier to Knife makers from beginner to expert

0

Your Cart is Empty

NB1211

Super Natural - Giraffe Bone Block

ITEM # NB1211G16

Supernatural Galaxy Series - Sponge Bone in Amber resin. Block
4.94'' x 1.85'' x 1.31'' inch thickness.

Finish your blocks up to a 1000 grit. Apply a very thin layer of super thin glue (CA) -- we recommend Zap A Gap #PT01. You can spray mild CA accelerator like our #PT15 on the scale. Sand again from 400 grit up to 1000 grit. Inspect for lumps of CA and sand until smooth.
Repeat above process with a new coat of CA. You can repeat this process up to 4 times but do not use too much CA to avoid cracking. Sand until you are happy with the finish. Final finish with Micron sanding paper 4000 grit - our #WD103 and buff lightly on a buffing wheel.


*Can NOT ship outside of the United States*

//balance page query //end of balance