Monday - Friday 8:30am - 5:30pm Central - Our team is here to help call 800-351-8900

0

Your Cart is Empty

HP650

D-Lock Hinge Pin

Designed to keep hinge pins from turning during installation and fine adjusting. The locking liner usually has a D shaped hole for hinge pins, however, you can place the pin
into the locking liner and interrupt the hole next to the flat by using an auto center punch
to expand the metal, creating a protrusion to hold the pin in place. It does not take much
stretching of the metal to keep the hinge pin from turning. Can be used in round holes.

Designed for installation through the bolster.

Complete installation using a T8 torx wrench to tighten the screw supplied.

Overall length is .434", under the head is .373".

BODY .195"     HEAD  .247"

303 Stainless

//balance page query //end of balance