Home > Rivets & Fasteners > Pivot Pins > D-Lock Hinge
Designed to keep hinge pins from turning during installation and fine adjusting. The locking liner usually has a D shaped hole for hinge pins, however, you can place the pin into the locking liner and interrupt the hole next to the flat by using an auto center punch to expand the metal, creating a protrusion to hold the pin in place. It does not take much stretching of the metal to keep the hinge pins from turning. Can be used in round holes.
Sort By:
1
HP650    D-Lock Hindge Pin HP650 D-Lock Hindge Pin

Designed for installation through the bolster. Complete installation using a T8 torx wrench to tighten the screw supplied. Overall length is .434", under the head is .373".

BODY       HEAD
.195"        .247"

Price: $3.25
HP660    D-Lock Hidden Hinge Pin HP660 D-Lock Hidden Hinge Pin

Designed to be hidden under the bolsters. Use a T8 torx wrench to tighten. Overall length is .240", under the head is .205".

BODY      HEAD
.156"       .216"

Price: $3.25
   
 
1