Home > Adhesives
Glues and Epoxies to hold the handles and bolsters onto your knife. add some color to the glue to make an interesting touch to your knife's style.
Sort By:
1
SC107   Pro Tips Extensions SC107 Pro Tips Extensions

Use Spout, Cap, or Pro Tip Extensions  with the spout for greater precision in glue application. Replacement spouts and caps may become necessary if glue drips on cap or clogs tip.

Price: $0.95
SC108   Hot Tips Spout & Cap pkg 2 SC108 Hot Tips Spout & Cap pkg 2

Spout, Cap, and Pro Tip Extensions use Pro Tip extensions with the spout for greater precision in glue application. Replacement spouts and caps may become necessary if glue drips on cap or clogs tip.

Price: $2.47
DV360    Devcon Thread-Lock DV360 Devcon Thread-Lock

Use to lock nuts, bolts and screws where vibrations are a problem.

Price: $2.99
DVE5  Devcon Epoxy 5 Minute Syringe DVE5 Devcon Epoxy 5 Minute Syringe

Gives you correct amounts of resin and hardener automatically, no
measuring required. The high-strength 2-ton epoxy is water resistant,
bonds wood, metals, micarta, stag, Dymondwood, virtually any knife part
with a crystal clear finish.

Price: $4.50
DVE30    Devcon Epoxy 2-ton syringe   **CAN NOT SHIP AIR OR EXPRESS MAIL** DVE30 Devcon Epoxy 2-ton syringe **CAN NOT SHIP AIR OR EXPRESS MAIL**

Devcon Epoxy in the Dev-tube, gives you correct amounts of resin and hardener automatically, no measuring required.

Price: $4.50
PT16    Z-7 Debonder 1 oz   **CAN NOT SHIP AIR OR EXPRESS MAIL** PT16 Z-7 Debonder 1 oz **CAN NOT SHIP AIR OR EXPRESS MAIL**

Z-7 DEBONDER will soften CA glue prior to sanding. Removes any instant glue from skin, work surfaces, many other uses.

DUE TO FAA REGULATIONS THIS ITEM CANNOT SHIP NEST DAY, 2ND DAY AIR OR INTERNATIONAL.

Price: $4.79
PT15    Zap A Gap Kicker  2 oz  **CAN NOT SHIP AIR OR EXPRESS MAIL** PT15 Zap A Gap Kicker 2 oz **CAN NOT SHIP AIR OR EXPRESS MAIL**

CA accelerator. Use ZIP KICKER for a faster cure.  Accelerates cure time of Zap CA's.  Will not craze most plastics.  Solves most tough-to-bond combinations of materials.
DUE TO FAA REGULATIONS THIS ITEM CANNOT SHIP NEXT DAY, 2ND DAY AIR OR INTERNATIONAL

Price: $6.99
SC106   Solvent De-bonder   2oz SC106 Solvent De-bonder 2oz

Super Solvent used to de-bond and dissolve CA glue from your hands and other surfaces. A small amount usually does the trick. Safe to use with most paints and finishes but testing on an inconspicuous area is reccomended.

Price: $10.95
DVE33    Devcon Epoxy 2-ton Bottle (2)   **CAN NOT SHIP AIR OR EXPRESS MAIL** DVE33 Devcon Epoxy 2-ton Bottle (2) **CAN NOT SHIP AIR OR EXPRESS MAIL**

Non-Shrinking.  Resists salt solution, unleaded gasoline, mineral spirits, oil and anti-freeze.

Price: $12.95
SC101   Hot Stuff Original 2oz SC101 Hot Stuff Original 2oz

Hot Stuff Original is a think CA glue with water-like viscosity (3cps). Will wick into tight-fitting joints of non-pouropus material. Fill and stop the spread of splits and hairline cracks in wood and stone. Strengthen stone and porous wood by applying to entire surface allowing it to soak into the pores and cracks. Use as a final finish for small knife handles or pens. Cure time is three to five seconds between tightly fitting, non-porous parts.

Price: $12.95
SC103   Super T Medium  2oz  CAN NOT SHIP AIR OR INTERNATIONALLY SC103 Super T Medium 2oz CAN NOT SHIP AIR OR INTERNATIONALLY

Super T Gap Filler is a medium gap filling glue with viscosity similar to syrup (200-300 cps). Perfect for gluing somewhat porous materials and pieces which don't fit tightly. Super T cures within 10-25 seconds giving you additional positioning time. For best bond of two pieces, apply Super T to one piece and accelerator to the other - push together and hold tightly for 30 seconds.

Price: $12.95
SC104   Special T Thick   2oz SC104 Special T Thick 2oz

Special T Gap Filler is a medium gap line filling glue with a viscosity similar to honey (1150-1500 cps). Used to fill large gaps and glue parts that don't fit well together. It can also fill cracks and gaps in handle materials to preserve structure and integrity while sealing from moisture and contaminates.

Price: $13.45
DVE59    Devcon Epoxy 5 min. bottles (2) DVE59 Devcon Epoxy 5 min. bottles (2)

Use the water resistant epoxy on wood, metals, Micarta, stag, Dymondwood. Can be used on virtually any knife part.

Price: $13.95
SE12   Epoxy Pigment - White SE12 Epoxy Pigment - White

Color: White

Size: 2oz

Add the paste to the epoxy resin then measure that mixture in the proper ration with the hardener. Use a maximum of approximately 10% volume pigment paste to combined resin and hardener. To maintain the same color over several projects, mix a master batch of color with resin and store for later use - only add hardener when you are ready to use.

Price: $14.95
SE22   Epoxy Pigment - Black SE22 Epoxy Pigment - Black

Color: Black

Size: 2oz

Add the paste to the epoxy resin then measure that mixture in the proper ration with the hardener. Use a maximum of approximately 10% volume pigment paste to combined resin and hardener. To maintain the same color over several projects, mix a master batch of color with resin and store for later use - only add hardener when you are ready to use.

Price: $14.95
SE32   Epoxy Pigment - Brown SE32 Epoxy Pigment - Brown

Color: Brown

Size: 2oz

Add the paste to the epoxy resin then measure that mixture in the proper ration with the hardener. Use a maximum of approximately 10% volume pigment paste to combined resin and hardener. To maintain the same color over several projects, mix a master batch of color with resin and store for later use - only add hardener when you are ready to use.

Price: $14.95
SE42   Epoxy Pigment - Blue SE42 Epoxy Pigment - Blue

Color: Blue

Size: 2oz

Add the paste to the epoxy resin then measure that mixture in the proper ration with the hardener. Use a maximum of approximately 10% volume pigment paste to combined resin and hardener. To maintain the same color over several projects, mix a master batch of color with resin and store for later use - only add hardener when you are ready to use.

Price: $14.95
SC105   Quick Accelerator  6oz SC105 Quick Accelerator 6oz

NCF Quick Accelerator will decrease cure time with only a light mist applied from 8-12 inches away. Designed to flash off instantly so do not over-apply (You will see a wet look if you use to much). Over-application can discolor some surfaces - especially stone.

Price: $15.95
WE5018  White Pigment WE5018 White Pigment

Epoxy based liquid colorants used to tint epoxy mixture and proved an even base fro the final finish system. Add to mixed resin/hardener at rate of approx. 1 tsp of pigment to a 8 fluid oz epoxy. More pigment increases the opaqueness and mixture viscosity. One 4 fl oz bottle will tint approximatly 1-1/2 gallons of epoxy.

Price: $17.95
WE5028  Black Pigment WE5028 Black Pigment

Epoxy based liquid colorants used to tint epoxy mixture and proved an even base fro the final finish system. Add to mixed resin/hardener at rate of approx. 1 tsp of pigment to a 8 fluid oz epoxy. More pigment increases the opaqueness and mixture viscosity. One 4 fl oz bottle will tint approximatly 1-1/2 gallons of epoxy.

Price: $17.95
WE5038  Gray Pigment WE5038 Gray Pigment

Epoxy based liquid colorants used to tint epoxy mixture and proved an even base fro the final finish system. Add to mixed resin/hardener at rate of approx. 1 tsp of pigment to a 8 fluid oz epoxy. More pigment increases the opaqueness and mixture viscosity. One 4 fl oz bottle will tint approximatly 1-1/2 gallons of epoxy.

Price: $17.95
WE300   Mini Pump Set WE300 Mini Pump Set

Designed for convenient and accurate metering of #105 resin and #206 hardener. Calibrated to deliver approximately 0.8 fl oz of resin / hardener with one full stroke. Set contains one resin pump, and two hardener pumps which mount directly on the containers eliminating mess and waste. Read and follow priming, ratio verification, and operating instructions included with pumps. ***Resin and Hardener NOT included***

Price: $17.95
SE24   Epoxy Pigment - Black SE24 Epoxy Pigment - Black

Color: Black

Size: 4oz

Add the paste to the epoxy resin then measure that mixture in the proper ration with the hardener. Use a maximum of approximately 10% volume pigment paste to combined resin and hardener. To maintain the same color over several projects, mix a master batch of color with resin and store for later use - only add hardener when you are ready to use.

Price: $17.95
IR951    3M Disc/Belt Adhesive IR951 3M Disc/Belt Adhesive

Allows multiple disc applications without adhesive build up. Discs remove easily and cleanly. Used for application of Graphite Platen material.

Price: $18.95
SE62   Epoxy Pigment - Green SE62 Epoxy Pigment - Green

Color: Green

Size: 2oz

Add the paste to the epoxy resin then measure that mixture in the proper ration with the hardener. Use a maximum of approximately 10% volume pigment paste to combined resin and hardener. To maintain the same color over several projects, mix a master batch of color with resin and store for later use - only add hardener when you are ready to use.

Price: $18.95
SE72   Epoxy Pigment - Red SE72 Epoxy Pigment - Red

Color: Red

Size: 2oz

Add the paste to the epoxy resin then measure that mixture in the proper ration with the hardener. Use a maximum of approximately 10% volume pigment paste to combined resin and hardener. To maintain the same color over several projects, mix a master batch of color with resin and store for later use - only add hardener when you are ready to use.

Price: $18.95
WE206A West System Adhesive 105/206 .44 pt Slow Hardener (CANNOT SHIP AIR) WE206A West System Adhesive 105/206 .44 pt Slow Hardener (CANNOT SHIP AIR)

WEST SYSTEM epoxy cures to a high-strength plastic solid at room temperatures, by mixing 105 liquid epoxy resin and 206 hardener in a 5:1 ratio. Designed specifically to bond to a wide range of materials including fiberglass, many metals, wood fibers, reinforcing fabrics, foam and other composite materials. This highly moisture-resistant plastic is highly recommended when extended working and cure time are needed or to provide adiquate working time at higher temperatures. The 206 slow-cure hardener has a working time of 90 to 110 minutes at 70℉ with a minimum cure temperature of 60℉. Cure time for maximum strength is 1-4 days. West Epoxy is easy to sand and shape when cured and does not shrink after curing.



Can NOT Ship Air

Price: $21.50
SE44   Epoxy Pigment - Blue SE44 Epoxy Pigment - Blue

Color: Blue

Size: 4oz

Add the paste to the epoxy resin then measure that mixture in the proper ration with the hardener. Use a maximum of approximately 10% volume pigment paste to combined resin and hardener. To maintain the same color over several projects, mix a master batch of color with resin and store for later use - only add hardener when you are ready to use.

Price: $21.95
SE34   Epoxy Pigment - Brown SE34 Epoxy Pigment - Brown

Color: Brown

Size: 4oz

Add the paste to the epoxy resin then measure that mixture in the proper ration with the hardener. Use a maximum of approximately 10% volume pigment paste to combined resin and hardener. To maintain the same color over several projects, mix a master batch of color with resin and store for later use - only add hardener when you are ready to use.

Price: $21.95
SE14   Epoxy Pigment - White SE14 Epoxy Pigment - White

Color: White

Size: 4oz

Add the paste to the epoxy resin then measure that mixture in the proper ration with the hardener. Use a maximum of approximately 10% volume pigment paste to combined resin and hardener. To maintain the same color over several projects, mix a master batch of color with resin and store for later use - only add hardener when you are ready to use.

Price: $21.95
WE8654   5 Minute Adhesive WE8654 5 Minute Adhesive

Easy-to-use, fast curling epoxy system for quick repairs, tooling and general bonding. Use for spot application to hold parts in place while standard epoxy bonds cure. Bonds to wood, fiberglass, and metal. 1:1 mixture. Cures in 3-5 minutes. 4 fl. oz resin and 4 fl. oz hardener.

Price: $22.95
BWA    Acraglass Kit   **CAN NOT SHIP AIR OR EXPRESS MAIL** BWA Acraglass Kit **CAN NOT SHIP AIR OR EXPRESS MAIL**

Kit contains everything needed to bed 2 rifles or lots of knife handle.

Price: $22.99
SC102   Hot Stuff Original 4oz SC102 Hot Stuff Original 4oz

Super thin and hot - this CA glue will wick into tight fitting joints or non-porous materials to stop spread of splits and hairline cracks.

Price: $24.59
WE6508   G/Flex® Epoxy    G/Flex Liquid 4 oz. WE6508 G/Flex® Epoxy G/Flex Liquid 4 oz.

G/flex epoxies are toughened, resilient two-part epoxies engineered for superior grip to many stubborn surfaces.

Price: $24.95
SE52   Epoxy Pigment - Yellow SE52 Epoxy Pigment - Yellow

Color: Yellow

Size: 2oz

Add the paste to the epoxy resin then measure that mixture in the proper ration with the hardener. Use a maximum of approximately 10% volume pigment paste to combined resin and hardener. To maintain the same color over several projects, mix a master batch of color with resin and store for later use - only add hardener when you are ready to use.

Price: $27.95
SE74   Epoxy Pigment - Red SE74 Epoxy Pigment - Red

Color: Red

Size: 4oz

Add the paste to the epoxy resin then measure that mixture in the proper ration with the hardener. Use a maximum of approximately 10% volume pigment paste to combined resin and hardener. To maintain the same color over several projects, mix a master batch of color with resin and store for later use - only add hardener when you are ready to use.

Price: $27.95
SE64   Epoxy Pigment - Green SE64 Epoxy Pigment - Green

Color: Green

Size: 4oz

Add the paste to the epoxy resin then measure that mixture in the proper ration with the hardener. Use a maximum of approximately 10% volume pigment paste to combined resin and hardener. To maintain the same color over several projects, mix a master batch of color with resin and store for later use - only add hardener when you are ready to use.

Price: $27.95
BWAG    Acraglas Gel Kit   **CAN NOT SHIP AIR OR EXPRESS MAIL** BWAG Acraglas Gel Kit **CAN NOT SHIP AIR OR EXPRESS MAIL**

Acraglas gel has all the features of Acraglas, plus it shrinks slightly
less and the butter smooth consistency prevents runs and mess.

Price: $28.99
SE54   Epoxy Pigment - Yellow SE54 Epoxy Pigment - Yellow

Color: Yellow

Size: 4oz

Add the paste to the epoxy resin then measure that mixture in the proper ration with the hardener. Use a maximum of approximately 10% volume pigment paste to combined resin and hardener. To maintain the same color over several projects, mix a master batch of color with resin and store for later use - only add hardener when you are ready to use.

Price: $39.95
WE105A West System Adhesive 105/206 Epoxy (CANNOT SHIP AIR) WE105A West System Adhesive 105/206 Epoxy (CANNOT SHIP AIR)

WEST SYSTEM epoxy cures to a high-strength plastic solid at room temperatures, by mixing 105 liquid epoxy resin and 206 hardener in a 5:1 ratio. Designed specifically to bond to a wide range of materials including fiberglass, many metals, wood fibers, reinforcing fabrics, foam and other composite materials. This highly moisture-resistant plastic is highly recommended when extended working and cure time are needed or to provide adiquate working time at higher temperatures. The 206 slow-cure hardener has a working time of 90 to 110 minutes at 70℉ with a minimum cure temperature of 60℉. Cure time for maximum strength is 1-4 days. West Epoxy is easy to sand and shape when cured and does not shrink after curing.


Can NOT Ship Air

Price: $41.95
WE206B   West System Adhesive 105/206 .86 qt Slow Hardener WE206B West System Adhesive 105/206 .86 qt Slow Hardener

WEST SYSTEM epoxy cures to a high-strength plastic solid at room temperatures, by mixing 105 liquid epoxy resin and 206 hardener in a 5:1 ratio. Designed specifically to bond to a wide range of materials including fiberglass, many metals, wood fibers, reinforcing fabrics, foam and other composite materials. This highly moisture-resistant plastic is highly recommended when extended working and cure time are needed or to provide adiquate working time at higher temperatures. The 206 slow-cure hardener has a working time of 90 to 110 minutes at 70℉ with a minimum cure temperature of 60℉. Cure time for maximum strength is 1-4 days. West Epoxy is easy to sand and shape when cured and does not shrink after curing.



Can NOT Ship Air

Price: $46.95
WE105B   West System Adhesive 105/206 Epoxy .98 Gallon WE105B West System Adhesive 105/206 Epoxy .98 Gallon

WEST SYSTEM epoxy cures to a high-strength plastic solid at room temperatures, by mixing 105 liquid epoxy resin and 206 hardener in a 5:1 ratio. Designed specifically to bond to a wide range of materials including fiberglass, many metals, wood fibers, reinforcing fabrics, foam and other composite materials. This highly moisture-resistant plastic is highly recommended when extended working and cure time are needed or to provide adiquate working time at higher temperatures. The 206 slow-cure hardener has a working time of 90 to 110 minutes at 70℉ with a minimum cure temperature of 60℉. Cure time for maximum strength is 1-4 days. West Epoxy is easy to sand and shape when cured and does not shrink after curing.



Can NOT Ship Air

Price: $101.50
   
 
1