Graduations: 32,64 size: 1/4 x 6

Graduations: 32,64  Size: 1/2 x 6

Holder dimensions: 4-1/2" x 1" x 1-1/4"
Hold up to 3/8" Dia. stem

Graduations:   32,64,10,100   Size:  1/2 x 6.

A deep blue dye for layout work. Brushed onto a clean metal surface, it dries quickly, providing an opaque blue background that makes scribed lines stand out sharp and clear. Will not rub off, nor is it affected by cutting lubricants. Application brush in cap .

DUE TO FAA REGULATIONS THIS ITEM CANNOT SHIP AIR OR INTERNATIONALY

THE machinist reference book.

Preferred by machinists for setting bevels, measuring, and transferring angles.

0-1" range
.001" graduation
2" Dia. Dial face.

Z-limit Depth Measuring Base For 6" Calipers
Slot width 0.64"
Base width 3"

Gunsmith calipers. A must for every workshop, use to measure inside, outside and for marking and designing. Quick-adjusting, spring nut designed for making quick, positive adjustments. Sold as a set of 3.

***Shown with Optional Attachment***
Am. Nat. — U.S. 60° Std. has scale graduated in 14ths, 20ths, 24ths and 32nds for finding number of threads per inch. Table of double depths of threads for determining size of tap drills. All gaging surfaces ground. Gunsmith, Made in the USA.

Use to check case lengths and for general gunsmithing work, 4-way measurement; inside, outside, depth and step. Stainless steel hardened surface. Complete with case. Accuracy .001 per 6".

Satin chrome finish rules. 6" rule is approx. 3/4" wide and 3/64" thick.  Gunsmith Made in the USA.

Precision micrometer with .001 graduation. Carbide face anvil and spindle is hardened and ground with micro-lap finish on ends. Complete with wooden box. Gunsmith tool.

Used in milling machines and drill press to locate the edge and centers of work pieces. Has a .500" body and contact body with center to find edges and locate center lines and scribed lines on one end with a .200" contact body on the opposite end to find edges. Gunsmithing  Made in the USA

Precision micrometer with .001 graduation. Carbide face anvil and spindle is hardened and ground with micro-lap finish on ends. Complete with wooden box. Gunsmith tool

Stainless steel hardened frame with graduated scale and thumb roll. 4-way measurement: inside, outside, depth, step. Accuracy .001 per 6". Has a large LCD display window for easy reading. Inch/metric conversion or reading at the switch of a button. Gunsmith measuring.

0-1" Dial Indicator
Magnetic Base
22pc Indicator Point

0-2" range
.001" graduation
2" Dia. Dial face.

ST156M has 28 pitch ranges for gaging metric threads. Each leaf stamped with number of threads per inch. Made in the USA.

                   NUMBER             RANGE
CAT.#        OF LEAVES          OF THREADS
ST156M          28              .28 to  2.50 mm

Size  2" x 3" x 1/2"
Has two vials at right angles for cross test leveling and a plumb level at the top for checking squareness. Gunsmith  Made in the USA.

Graduation: 4R-8ths, 16ths, 32nds, 64ths
Blade: 0~12"
Accuracy +/- 15'

0~1" Outside Micrometer
4" Bevel Squarer
6" Dial Caliper
6" Flex Ruler

ST472 has 51 pitch ranges for gaging American National and U.S. Standard 60°.  Each leaf stamped with number of threads per inch. Gunsmith Made in the USA.

                      NUMBER              RANGE
CAT.#            OF LEAVES          OF THREADS
ST472                 51             4 to  84 threads/in.

Range 0-1"  Graduation .0001"
Satin chrome finish on sleeve and thimble. Quick-reading figures on thimble with every thousandth numbered; convenient decimal equivalents, too. Micro-lapped finish on carbide anvil and spindle faces. Smooth friction thimble for uniform pressure. Accurate measuring and repeatability. Extremely hard and stable one piece spindle. Great for Gunsmithing Made in the USA.

Range 1"-2"  Graduation  .0001"
Satin chrome finish on sleeve and thimble. Quick-reading figures on thimble with every thousandth numbered; convenient decimal equivalents, too. Micro-lapped finish on carbide anvil and spindle faces. Smooth friction thimble for uniform pressure. Accurate measuring and repeat-ability. Extremely hard and stable one piece spindle.  Great for Gunsmithing Made in the USA.

The only dial caliper made in the USA. Full six inch range, four-way stainless steel dial caliper with knife edge contacts for inside and outside measurements. Readings taken directly from the bar and dial indicator. Measurements with one hand, thumb roll for fine adjustment. Knurled thumb screws lock the moveable jaw and adjustable indicator dial at any setting. English model dial indicator graduated .001" with .100 range per revolution. Gunsmith Case included.

Sensitive, reliable and easy-to-read. With its three hardened contact points, the Universal Dial Test Indicator adjusts to any angle. Graduated in .001 dial reads 0-100 with a range of .200. Set comes with points C, D, and E. plus four attachments (a) clamp with 5/16" rod, (b) tool post holder with 5/16" rod, (c) snug complete for attaching (a) or (b) to dial test indicator, and (e) hole attachment. All in a fitted case. Gunsmith Made in the USA.

12" square with 3 Heads
Spirit level in square and protractor head, direct reading double 180 degree protractor scale, tempered satin chrome 12" blade. Protractor turret with cast heads and black wrinkle finish. Gunsmith Made in the USA.